• <del id="szlrd"><dl id="szlrd"></dl></del>
      1. Back

        MTF Variable Area Flow Meter (Rotameter)

        MTF variable area flow meter is measured by outputting 4~20 mA two-wire linear current signal, and the communication protocol is loaded. The remote configuration, monitoring, maintenance and calibration of the instrument can be realized. The pressure regulator (constant flow valve) can be selected to make the outlet flow stable.

        Contact Us

        Features

          1.It can measure liquid, gas and vapor, especially for the flow measurement with small flow rate and low Reynolds number, it has more unique advantages than other flow meters.
          2.Lower pressure loss, generally is 4~9kpa, higher is 20kpa.
          3.There is a wide flow range, generally is 10:1, the special design flow range can be extended.
          4.The factory calibration adopts the method of 11 sections calibration, and the precision of the product reaches 1.0 grade.
          5.It can select card sleeve connection, piping φ6mm、φ8mm、φ10mm、φ12mm. Flange connections can also be selected and the flange standard is determined according to user requirements.
          6.Max pressure is 69Mpa

        Main Technical Parameters

        Main Parameters

        Working Voltage: 12V~30VDC

        Output Signal: Two-wire 4~20 mADC current output and load HART protocol communication

        Flange Standard: HG/T20592-2009;HG/T20615-2009 or on request

        Power Supply Inlet: M12×1.5(Female Thread) or on request

        Input Impedance: >100MΩ

        Standard Load Resistance: 250Ω

        Nominal Pressure: DN15~DN50 is ≤10.0MPa,DN80~DN100 is≤6.3MPa or on request

        Accuracy: 1.0, 1.5, 2.0

        Turndown: 10:1

        Medium Temperature: -40℃≤T≤300℃

        Damping Time Selection: 0-32 seconds

        Ambient Temperature: -40℃≤T≤80℃ (When ≤-20℃, LCD is not displayed)

        Explosion-proof Type: Ex ia Ⅱ C T4 Ga; Ex d Ⅱ C T4 Gb

        IP Rating: IP66

         

        Measurement Range

        Water: 2.5 L/h~100000L/h(20℃)

        Air: 0.07 m3/h~1800m3/h(0.1013MPa, 20℃)

        DN15、DN20:η<5mPa.s(FZ15.1~FZ15.5)、η<30mPa.s(FZ15.6~FZ15.15、FZ20.1~FZ20.4)
        DN25、DN40: η<250mPa.s
        DN50、DN80、DN100: η<300mPa.s

         

        Classification

        Classified by installation mode: Vertical installation type and Horizontal installation type.

        Classified by applicable medium:

        Basic Type: It is applicable for liquid measurement

        Damping Type: It is applicable for gas and vapor measurement

        Anticorrosive Type: Lined with PTFE, suitable for corrosive medium measurement

        Clamp Type: Suitable for heat preservation or cooling of medium.

        Note: (Anticorrosive and clamp without the horizontal installation type)

        Applications

        煉油:催化重整、含酸沉淀池

        天然氣:硫磺回收、輕烴回收

        Solution

        Related Products

        您的瀏覽器當前寬度低于1100px;請使用1300px以上寬度訪問。

        国产牲交免费视频无遮拦,99热在线精品国产观看,欧美国产A级大片,国产爆乳合集在线观看视频
      2. <del id="szlrd"><dl id="szlrd"></dl></del>